Mist Eliminators Enquiry Form

To enable our technical staff to give the fullest advice, all sections of this form should be completed as comprehensively as possible.

If additional information is available details can be given on a separate sheet. A full technical appraisal canot be made hurriedly and 10 days should be allowed for our reply. Either send this form to us by clicking on the send button at the end of the form or print the form and return it to us at:

Sulzer Chemtech (UK) Ltd
Greenfield, Holywell, Flintshire, North Wales, CH8 9DP

Telephone: +44 (0) 1352 712 009
Fax: +44 (0) 1352 717 584


Click here to download the Enquiry Form in PDF Format

MIST ELIMINATOR
Enquiry Form

IMPORTANT: Please clearly state measurements used, whether imperial or metric and state unit and symbol

Knitmesh will offer an appropriate design from their range of mesh and vane mist eliminators.
However please express a specific preference for the type of equipment required in the box below.

Customer's Name: For the Attention of:

Customer's Address:


Telephone No.: Fax No.: Email:
Enquiry/order number
Quotation required by
Click to select the date
Delivery required by Click to select the date

1. APPLICATION


2. VESSEL
 NOTE: Please provide a copy of the vessel drawing if avaiable otherwise please provide a sketch.
a) Vessel
b) Diameter or size at Mist Eliminator location
C) Material


3. MIST ELIMINATOR SUPPORTS
Grids and welded mesh are normaly supplied and attached to Mist Eliminators at our factory. If these are to be supplied by yourselves, details and/or drawings should be provided.

a) Suggested material of construction


4. OPERATING DATA
a)Operating conditions: 1. Temperature: 
2. Pressure: 
b)Vapour flow rate
c) Velocity of vapour at Mist Eliminator location
d)Vapour material and density (weight/volume)
at operating conditions
e)Liquid material and density (weight/volume)
at operatingg conditions
f) Amount of entrainment load (Weight/hour)
g)Solids content
(material, type and amount)
h)Droplet and/or particle size
 

i) Further information


5. MIST ELIMINATOR
 Please give full reference if a test sample or previous installation is to be matched.
a)Suggested material
b)Allowable pressure drop
C)Is pressure drop or efficiency the more important consideration?
d)If installation cannot be made as a single unit, please give manhole size.

Name: Position in company: Date:

PLEASE CHECK THAT YOU HAVE COMPLETED THE CONTACT DETAILS AT THE BEGINING OF THE FORM